Cirrus V6-2.5L VIN H (1995)
Drive Belt: Adjustments
Power Steering Pump Belt Adjustment
For conventional belts and Poly-V belts, use belt tensioning Special Tool Kit C-4162 to obtain proper belt tension. Adjust the belt tension for a New or
Used belt as prescribed in specifications.
1. From the top of the vehicle loosen pivot bolt.
2. From under the vehicle loosen the locking bolts D and E.
3. Adjust belt tension with 1/2 inch breaker bar installed in adjusting bracket.
4. Tighten locking bolt E to 28 Nm (250 inch lbs.).
5. Tighten locking bolt D and the pivot bolt to 54 Nm (40 ft. lbs.).