Cirrus V6-2.5L VIN H (1995)
Engine Mount: Service and Repair
Left Mount
NOTE:
^
If centering or adjusting the engine/transmission assembly is needed refer to Adjustments.
^
The left side engine mount is a Hydro-Mount and may show surface cracks this will not effect it's performance and should not be replaced. Only
replace the Hydro-Mount when it's leaking fluid.
1. Support the transmission with a transmission jack.
2. Remove the three vertical bolts, from the mount to the transmission.
3. Remove the transmission mount fasteners and remove mount.
4. Reverse removal procedure for installation. Noting bolt specifications.
5. Perform engine support assemblies adjustment.
