Cirrus V6-2.5L VIN H (1995)
2. Assemble resonator pipe to catalytic convertor and attach to the supports on the underbody.
3. Install the muffler to resonator pipe and attach to the supports on the underbody.
4. Working from the front of system;
a. Align and tighten the catalytic convertor to exhaust manifold fasteners.
b. Align each component to maintain position and proper clearance with underbody parts and that all supports have equal load on them. Tighten
clamps to 80 Nm (60 ft lb).
5. Connect the downstream heated oxygen sensor, if equipped.