chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

Evaporator Housing Removal and Installation|Page 8298 > < Evaporator Housing Removal and Installation|Page 8296
Page 3
background image

Fig 80  Rear Y-Cam Actuator

5. Remove rear Y-cam actuator lever.
6. Turn front toggle lever until it lines up with slots on housing.
7. Pull straight up on toggle lever and slide toggle lever from underneath front actuator lever.
8. Remove front toggle lever.
9. Remove Y-cam rear lever.

Fig 81  Rear Air Inlet Door

10. Unsnap and remove rear air inlet door.
11. Front air inlet door and lever is serviced with recirculation housing.

Fig 82  Blower Motor Wiring

12. Remove blower motor wiring at resistor.

Evaporator Housing Removal and Installation|Page 8298 > < Evaporator Housing Removal and Installation|Page 8296