Cirrus V6-2.5L VIN H (1995)
Fuel Gauge Sender: Service and Repair
Fig. 14 Fuel Pump/Level Sensor Electrical Connector
FUEL LEVEL SENSOR
The fuel level sensor attaches to the side of the fuel pump module. Remove the fuel pump module to replace the fuel level sensor. Refer to Fuel
Pump Module Removal .
Fig. 14 Fuel Pump/Level Sensor Electrical Connector
NOTE: Remove fuel pump module to gain access to this sensor.
REMOVAL
1. Depress retaining tab and remove fuel pump/level sensor connector from bottom of fuel pump module electrical connector.
Fig. 15 Terminal Removal Tool
2. Using Special Tool #C-4334 terminal remover or equivalent, remove terminals from level sensor connector.