Cirrus V6-2.5L VIN H (1995)
TOWING
To avoid damage to bumper fascia and air dams, use of a flat bed towing device or wheel lift is recommended. When using a wheel lift towing device, be
sure the unlifted end and lifted wheels have at least 100 mm (4 in.) ground clearance. If a flat bed towing device is used, the approach angle should not
exceed 15 degrees. Vehicles can be tied to a flat bed towing device using the reinforced loops located under the front and rear bumpers on the drivers
side of the vehicle. There are also four reinforced elongated holes for T or R hooks located on the bottom of the front frame rail torque boxes behind the
front wheels and forward of the rear wheels inboard of the rocker panel weld seam.
POLICY: Information Only