Cirrus V6-2.5L VIN H (1995)
Engine Control Module: Service and Repair
Fig. 33 Auxiliary Jumper Terminal
Fig. 34 PCM Bracket Screws
The PCM attaches to a bracket between the air cleaner housing and Power Distribution Center (PDC) Fig. 33.
REMOVAL
1. Disconnect negative cable from auxiliary jumper terminal Fig. 34.
2. Disconnect both 40-way connectors from PCM.
3. Remove screws attaching PCM to bracket Fig. 34.
4. Lift PCM up to remove it from vehicle.
INSTALLATION
1. Install PCM. Tighten mounting screws.
2. Attach both 40-way connectors to PCM.
3. Connect negative cable to auxiliary jumper terminal.