Cirrus V6-2.5L VIN H (1995)
6. Release snaps holding air cleaner housing cover to housing.
7. Remove air cleaner cover and inlet hoses from engine.
8. Unplug TPS and idle air control motor connectors Figs. 5 and 6.
9. Pry retainer tab back on throttle cable and slide cable out of bracket Fig. 7. Remove cable from throttle lever.
10. Slide Speed control cable out of bracket, if equipped Fig. 7. Remove cable from throttle lever.
11. Remove EGR tube from intake plenum Fig. 8.
Fig. 5 Throttle Sensor Position Sensor
Fig. 6 Idle Air Control Module
Fig. 7 Throttle Cable Attachment
12. Remove plenum support bracket bolt located rearward of EGR tube Fig. 8.
13. Remove bolts holding upper intake plenum and remove plenum.
