Cirrus V6-2.5L VIN H (1995)
Ignition Switch Lock Cylinder: Service and Repair
Ignition Lock Cylinder Detentes
LOCK KEY CYLINDER
The lock cylinder is inserted in the end of the housing opposite the ignition switch. The ignition key rotates the cylinder to 5 different detents:
^
Accessory
^
Off (lock)
^
Unlock
^
On/Run
^
Start
Lock Cylinder Retaining Tab
REMOVAL
1. Disconnect negative cable from auxiliary jumper terminal.
2. Remove upper steering column shroud.
3. Pull lower shroud down far enough to access lock cylinder retaining tab.
4. Place key cylinder in RUN position. Depress retaining tab and remove key cylinder.