chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

Manual Transaxle|Page 7487 > < Automatic Transaxle|Page 7484
Page 1
background image

Starter Motor: Testing and Inspection
Manual Transaxle

-

Check for a blown engine starter motor fuse in cavity 8 of the PDC

-

Move the ignition key to the START position and with the clutch pedal depressed, listen for the starter motor relay to click. The engine starter
motor relay is located in the PDC

-

Check for a good ground at the starter motor

Manual Transaxle|Page 7487 > < Automatic Transaxle|Page 7484