Cirrus V6-2.5L VIN H (1995)
Power Steering Fluid Reservoir: Service and Repair
Use care when replacing power steering fluid hoses on power steering reservoir. Avoid excessive force when removing or installing hoses, as nipples on
reservoir may break off.
1. Using a siphon pump, remove fluid from power steering fluid reservoir.
2. Raise vehicle.
3. Remove power steering fluid supply hose at power steering pump.
4. Drain fluid remaining fluid from supply hose and power steering fluid reservoir until empty.
5. Lower vehicle.
6. Remove power steering fluid return and supply hose from power steering reservoir.
7. Remove reservoir attaching bolts on engine, then reservoir.
8. Reverse procedure to install, noting the following:
