Concorde V6-2.7L VIN R (1998)
Figure 80-Piston Ring-Installation
Figure 81-Side Rail-Installation
1. The No. 1 and No. 2 piston rings have a different cross section. Ensure No. 2 ring is installed with manufacturers I.D. mark (dot) facing up,
towards top of the piston.
CAUTION: Install piston rings in the following order:
2. Oil ring expander.
3. Upper oil ring side rail.
4. Lower oil ring side rail.
5. No. 2 Intermediate piston ring.
6. No. 1 Upper piston ring.
Figure 82 Upper And Intermediate Rings - Installation
7. Install the side rail by placing one end between the piston ring groove and the expander. Hold end firmly and press down the portion to be installed
