Concorde V6-2.7L VIN R (1998)
Figure 70 Structural Collar
5. Install structural collar using the following tightening sequence:
e. Install the vertical collar to oil pan bolts (1). Torque bolts initially to 1.1 Nm (10 inch lbs.).
f.
Install collar to transmission bolts(2) and torque to 55 Nm (40 ft. lbs.).
g. Starting with the center vertical bolts (1) and working outward, final torque bolts to 55 Nm (40 ft. lbs.).
6. Install oil filter and drain plug.
7. Lower vehicle and install oil dipstick and housing.
8. Fill engine crankcase with proper oil to correct level.