Concorde V6-2.7L VIN R (1998)
Figure 52 Timing Chain Cover Sealing
3. Before installing timing cover gasket apply a 1/8 inch bead of Mopar Silicone Rubber Adhesive Sealant to the parting lines between the oil pan
and cylinder block.
4. Install timing cover and gasket. Tighten M10 cover bolts to 54 Nm (40 ft. lbs.) and M6 bolts to 12 Nm (105 inch lbs.).
5. If not previously performed, install crankshaft oil seal using Special Tool 6780-2 sleeve and 6780-2 installer.
6. Install crankshaft damper and tighten center bolt to 170 Nm (125 ft. lbs.)
7. Attach power steering pump to bracket.
8. Install A/C belt tensioner assembly to timing cover.
9. Install accessory drive belt tensioner pulley and bracket.
10. Install fan module, A/C and accessory drive belts. Refer to Cooling System.
11. Install upper radiator crossmember.
12. Connect negative cable at right strut tower.
