Concorde V6-2.7L VIN R (1998)
Cabin Temperature Sensor / Switch: Service and Repair
The In-car Temperature Sensor is part of the ATC Control Head and not a separate service part. If defective, the complete ATC head must be replaced.
ATC In - Car Temperature Sensor
REMOVAL
1. Open hood and disconnect the negative battery cable remote terminal from the remote battery post.
2. Remove the instrument top cover.
3. Remove tile two sun sensor mounting screws.
4. Disconnect the wire connector and remove the sensor.
INSTALLATION
-
For installation, reverse the above procedures
The ATC In-Car Temperature Sensor is located in the Control Head. The Control Head must be removed for service to the sensor.
REMOVAL
Negative Battery Cable Remote Terminal
Ambient Temperature Sensor Location