Concorde V6-2.7L VIN R (1998)
Hose/Line HVAC: Service and Repair
A/C Discharge Hose/Line Replacement
REMOVAL
1. Remove refrigerant from the A/C system using a refrigerant recovery machine. Refer to: Heating and Air Conditioning, Service and Repair,
Refrigerant System Evacuate, See: Heating and Air Conditioning/Service and Repair/Refrigerant System Evacuate
2. Disconnect A/C pressure transducer wire harness.
3. Disconnect discharge line at condenser using a M13 Hex wrench for 6 mm.
CAUTION: Cap all lines that are not being replaced and cap the expansion valve tubes.
4. Disconnect line at A/C compressor using a M10 Hex wrench.
INSTALLATION
-
For installation, reverse the above procedures. Then, tighten bolts to 23 N.m (17 ft. lbs.) at condenser and compressor.