Concorde V6-2.7L VIN R (1998)
Body Control Module: Scan Tool Testing and Procedures
Refer to the DRB user guide for instructions and assistance with reading trouble codes, erasing trouble codes, and other DRB functions.
DRBIII ERROR MESSAGES
Under normal operation, the DRB will display one of only two error messages:
-
User-requested WARM Boot
-
User-Requested COLD Boot
If the DRB should display any other error message, record the entire display and call the Scantool manufacturer for information and assistance.
This is a sample of such an error message display:
ver: 2.14
date: 26 Jul93
file: key_itf.cc
date: Jul 26 1993
line: 548
err: Oxi
User-Requested COLD boot
Press MORE to switch between this display and the application screen.
Press F4 when done noting information.
DRBIII DOES NOT POWER UP
If the LED's do not light or no sound is emitted at start up, check for loose cable connections or a bad cable. If all connections are proper between
the DRB and the vehicle or other devices, and the vehicle battery is fully charged, see vehicle communication test 1A
DISPLAY IS NOT VISIBLE
Low temperatures will affect the visibility of the display. Adjust the contrast to compensate for this condition.
