Concorde V6-2.7L VIN R (1998)
-
Memory system (LHS and 300M)
-
Overhead travel information system
-
Power door lock multiplexing control
-
Rear Window Defogger Control
-
Remote Keyless Entry with Panic Mode
-
Remote power decklid release
-
Rolling door lock control (customer programmable)
-
Sentry key immobilizer
-
Speed proportional steering
-
Vehicle Theft Security System
-
Wiper Control (speed sensitive with return to park)
The BCM receives information over the PCI Bus from the PCM in order to support certain features. The required information is as follows:
-
Engine RPM
-
Engine Temperature
-
Injector on Time and Distance Pulses
-
Vehicle Speed
-
Charging System Failure, Engine Temperature Limp-In, VTSS Arming Status
-
Engine Model
-
"Check Engine" lamp status
The BCM provides the PCM with information on the NC switch status, battery temperature which is determined by the ambient temperature sensor and
the "OK to Start" or VTSS status.
