Concorde V6-2.7L VIN R (1998)
Body Control Module: Technician Safety Information
DANGER!!! Engines produce carbon monoxide that is odorless, causes slower reaction time, and can lead to serious injury. When the engine is
operating, keep service areas WELL VENTILATED or attach the vehicle exhaust system to the shop exhaust removal system.
Set the parking brake and block the wheels before testing or repairing the vehicle. It is especially important to block the wheels on front-wheel drive
vehicles; the parking brake does not hold drive wheels.
When servicing a vehicle, always wear eye protection, and remove any metal jewelry such as watchbands or bracelets that might make an inadvertent
electrical contact.
When diagnosing a body system problem, it is important to follow approved procedures where applicable. Following these procedures is very important
to the safety of individuals performing diagnostic tests.
ROAD TESTING A COMPLAINT VEHICLE
Some complaints will require a test drive as part of the repair verification procedure. The purpose of the test drive is to try to duplicate the
diagnostic code or symptom condition.
CAUTION: Before road testing a vehicle, be sure that all components are reassembled. During the test drive, do not try to read the DRB screen
while in motion. Do not hang the DRB from the rear view mirror or operate it yourself. Have an assistant available to operate the DRB.
