Concorde V6-2.7L VIN R (1998)
Power Window Switch: Testing and Inspection
Master Window Switch
Passenger Window Switch
For switch testing, remove the switch from its mounting, refer to Switch Removal. Using an ohmmeter refer to Window Switch Continuity Charts to
determine if continuity is correct. If the results are not obtained, replace the switch.
The master window switch has an Auto-Down feature. Actuation of the master switch to the second down detent position will move the drivers side
window completely down. The electronic switch will automatically disconnect the motor approximately 1 second after the window bottoms out.
Failure of the electronic switch to detect stall current will cause the switch to disconnect after approximately 15 seconds of operation. The auto down
function can be canceled by any movement of the switch.