Concorde V6-2.7L VIN R (1998)
Alignment: Service and Repair
Rear Alignment
Rear Wheel Toe Adjustment
1. Loosen lateral link, adjustment link jam-nuts. Rotate adjustment links as required to set rear wheel Toe to specifications. Do not exceed the
maximum length dimensions of the lateral links shown. Both dimensions must be checked to ensure they do not exceed maximums allowed.
Lateral Link Maximum Length Dimensions
CAUTION: When setting rear ,"Toe In" on vehicle. The maximum lengths of the adjustable lateral link at the locations shown must not be
exceeded. If these maximum lengths are exceeded, inadequate retention of adjustment link to the inner and outer link may result. Ensure that the
adjustment sleeve jam-nuts are torqued to the required specifications when the Toe setting procedure is completed.
2. Tighten lateral link, adjustment link lock-nuts to 88 Nm (65 ft. lbs.) torque.
