Concorde V6-2.7L VIN R (1998)
CAUTION: After tie rod attaching bolts are torqued, bend attaching bolt retaining tabs against heads of attaching bolts.
13. Install the vacuum hose for the vacuum booster on intake manifold vacuum port. Install hose clamp on vacuum hose.
14. Install the master cylinder on the vacuum booster. Install the 2 nuts attaching the master cylinder to the vacuum booster. Tighten the master
cylinder mounting nuts to a torque of 28 Nm (260 inch lbs.).
15. Remove the clamp from the steering wheel.
