Concorde V6-2.7L VIN R (1998)
Lateral Links To Spindle Attaching Bolt
9. Remove the bolt attaching the lateral links to the spindle.
Spindle To Strut Assembly Pinch Bolt
10. Remove the pinch bolt from the spindle.
CAUTION: When inserting center punch into rear spindle, use care so point of center punch does not puncture strut assembly.
Center Punch Installed In Spindle
11. Insert a center punch into the hole on the spindle. Center punch must be tapped into the hole in the spindle until jammed into place. This will
spread the spindle casting allowing it to be removed from strut assembly.
