Concorde V6-2.7L VIN R (1998)
CAUTION: Keep the inner adjuster for reinstallation.
6. Lube inner adjuster threads with gear oil and reinstall to the cross haired index marks.
7. Install the differential carrier. Then install stub shaft seal protector.
8. Install the differential cover/outer adjuster assembly with sealant applied. Install and tighten differential cover bolts.
9. Tighten the outer adjuster 3/4 of a turn. Seat bearings by turning differential carrier three or four turns in both directions. Finish tightening the
adjuster 1/4 turn to its index mark (original location).
10. Reinstall long stub shaft, fill differential with fluid and reinstall transaxle.
11. After installing transaxle check transmission fluid level.
