Concorde V6-2.7L VIN R (1998)
Power Window Motor: Service and Repair
WARNING: DO NOT HAVE ANY HANDS OR FINGERS IN SECTOR GEAR AREA WHERE THEY CAN BE PINCHED BY SMALL
MOVEMENTS OF REGULATOR LINKAGE.
REMOVAL
Negative Battery Cable Remote Terminal
1. Open hood and disconnect the negative battery cable remote terminal from the remote battery post.
2. Move the window to the full-up position, if possible.
3. Remove door trim panel. Please refer to Body and Frame/Doors, Hood Trunk/Door/Door Panel/Service and Repair/ See: Body and Frame/Doors,
Hood and Trunk/Doors. Remove window regulator. Please refer to Windows and Glass/Windows/Window Regulator/Service and Repair/
WARNING: FAILURE TO CLAMP THE SECTOR GEAR TO THE MOUNTING PLATE WHEN REMOVING THE MOTOR CAN
RESULT IN INJURY.
4. Disconnect wiring connector from motor.
5. Secure the sector gear and mounting plate with a C clamp or similar clamping tool. This will prevent a sudden and forceful movement of the
regulator when the motor is removed.
Motor Removal
6. Remove three mounting screws that hold motor gearbox to regulator.
7. Remove motor from regulator.
