Concorde V6-201 3.3L VIN T FI (1993)
Door Glass Run Weatherstrip
REAR DOOR GLASS RUN WEATHERSTRIP REMOVAL
1. Remove door trim panel and upper retainer channel.
2. Remove door glass.
3. Pull weatherstrip from lower rear channel above door latch.
4. Disengage push-in fastener holding run weatherstrip to window frame.
5. Pull run weatherstrip from window frame channel.
INSTALLATION
1. Insert run weatherstrip into window frame channel.
2. Engage push-in fastener to hold run weatherstrip to window frame.
3. Insert weatherstrip into lower rear channel above door latch.
4. Install door glass.
5. Install upper retainer channel and door trim panel.
