Concorde V6-201 3.3L VIN T FI (1993)
Intake Manifold: Service and Repair
REMOVAL
1. Release fuel system pressure. See Powertrain Management/Fuel Delivery and Air Induction/Service and Repair for fuel system pressure
release procedure.
See: Powertrain Management/Fuel Delivery and Air Induction/Service and Repair
2. Drain cooling system. Disconnect negative cable from battery
3. Disconnect air tube from air cleaner and throttle body.
4. Hold throttle lever in wide-open position. Remove throttle cable and speed control cable from lever.
Fig. 15 Removing Throttle Cable And Speed Control Cable
5. Compress locking tabs on throttle cable and speed control cable and remove them from bracket Fig. 15.
Fig. 16 EGR Transducer
6. Disconnect electrical connectors from solenoid on EGR valve transducer and MAP sensor Fig. 16.
7. Disconnect the Intake Air Temperature sensor electrical connector on Flexible Fuel Vehicles (FFV) only.
8. Disconnect hose from PCV valve at rear of intake manifold plenum. Disconnect brake booster hose from nipple at rear of intake manifold plenum.
Disconnect vacuum line from fuel pressure regulator.