Concorde V6-201 3.3L VIN T FI (1993)
Fig. 17 Throttle Position Sensor
9. Disconnect purge hose from throttle body Disconnect electrical connector from throttle position sensor and idle air control motor Fig. 17.
Fig. 18 EGR Tube
10. Remove EGR tube mounting screws at intake manifold plenum Fig. 18.
11. Remove intake manifold plenum mounting bolts. Lift Plenum up off of engine. Cover intake manifold to prevent foreign material from entering
engine.
Fig. 19 Fuel Supply And Return Tubes
12. Disconnect fuel supply and return tube quick connect fittings at the rear of intake manifold Fig. 19. See Powertrain Management/Fuel Delivery
and Air Induction/Service and Repair.
See: Powertrain Management/Fuel Delivery and Air Induction/Service and Repair
13. Remove screw from fuel tube clamp Fig. 19. Separate fuel tubes from bracket.
14. Rotate injectors toward center of engine. Tag the injector connectors with their cylinder number. Disconnect electrical connector from injectors.
