Concorde V6-201 3.3L VIN T FI (1993)
Drive/Propeller Shafts, Bearings and Joints: Technical Service Bulletins
Supension/Drive Axles - Torque Revision
NO: 02-17-94
GROUP: Suspension
DATE: Nov. 18, 1994
SUBJECT:
Service Manual Revision - Torque Specifications
MODELS:
1993 (LH) Concorde/Intrepid/Vision
DISCUSSION:
The adjustable link jam nut and stabilizer bar link-to-strut assembly nut torque on Page 2-71 of the 1993 Concorde/Intrepid/Vision (Publication No.
81-270-3140), were revised in Nov. 1992 on Technical Service Bulletin 02-07-92. The front stub axle to hub and bearing retaining nut torque, also on
Page 2-71, was revised in Sept. 1994 on Technical Service Bulletin 02-13-94. The later Technical Service Bulletin did not pick up the revision made in
1992. The purpose of this Technical Service Bulletin is to include both revisions on the same Service Manual Page. The revisions are highlighted with
**ASTERISKS**.
Please insert the revised Service Manual Page in the appropriate Service Manual.
MANUAL
PUBLICATION PAGE
CHANGE
1993 Concorde/
81-270-3140
2-71
Two Previous Torque Corrections
Intrepid/Vision
Combined on One Page