Concorde V6-201 3.3L VIN T FI (1993)
Wiper Motor: Technical Service Bulletins
Wiper Motor - Carrier Pocket Drainage
NO.:
08-11-93
GROUP:
Electrical
DATE:
Mar. 12, 1993
SUBJECT:
Wiper Motor Service
MODELS:
1993 (LH) Concorde/Intrepid/Vision
DISCUSSION:
On vehicles built before January 11, 1993 (MDH 0111XX), whenever a wiper motor is removed for service, additional drain holes should be drilled in
the windshield wiper carrier pocket to improve drainage.
REPAIR PROCEDURE:
This repair involves adding additional drain holes to the wiper carrier pocket.
1.
Remove the wiper motor and carrier as described on page 8K-7 of the 1993 Concorde/Intrepid/Vision Service Manual.
2.
Drill five 1/2 inch diameter holes in the pocket in the windshield wiper carrier as illustrated.
3.
Install the wiper motor and carrier.
POLICY:
Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
Labor Operation No. 08-52-80-90 ................................. 0.2 Hrs.
FAILURE CODE:
XX - Service Adjustments
