chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

Power Antenna|Page 6352 > < Diagram Information and Instructions|Page 6349
Page 1
background image

Antenna: Description and Operation
Power Antenna

CIRCUIT OPERATION

The power antenna is used on the premium systems only. Battery feed for the antenna is provided on circuit F35.

This circuit is protected by a 20 Amp circuit breaker located in cavity 23 of the junction block. The F35 circuit is spliced and provides power for
the power door locks, power seats, power deck lid pull down, and power sunroof.

The circuit breaker is powered by circuit A3 from the Power Distribution Center (PDC). This circuit is protected by a 30 Amp fuse located in
cavity H of the PDC.

Ground for the antenna is provided on circuit Z1 which terminates at the left rear wheel well.

Circuit X60 is also connected from the radio and spliced to the amplifier and the power antenna.

Power Antenna|Page 6352 > < Diagram Information and Instructions|Page 6349