Concorde V6-215 3.5L SOHC (1996)
Amplifier: Description and Operation
CIRCUIT OPERATION
The power amplifier is used in the midline and premium systems only. It is placed between the radio and the speakers. The feed for the amplifier is
provided on the F30 circuit.
The F30 circuit is protected by a 20 Amp fuse located in cavity 8 of the junction block. Circuit F30 is spliced and provides power to the horns and
the cigar lighter. Ground is provided on the Z1 circuit and terminates at the left rear wheel well.
Power for the F30 circuit is provided on circuit A13. This circuit originates in the Power Distribution Center (PDC) and is protected by a 20 Amp
fuse located in cavity E.
Circuit X60 is also connected from the radio and spliced to the amplifier and the power antenna.
The amplifier used for the midline is different than the one used for the premium system. This difference is in the type of noise suppression used.
