chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

Suspension/Frame - Popping or Metallic Noises|Page 6777 > < Suspension/Frame - Popping or Metallic Noises
Page 1
background image

Front Subframe Mount: By Symptom

Technical Service Bulletin # 13-01-97

Date: 970613

Suspension/Frame - Popping or Metallic Noises

NO: 13-01-97

GROUP: Frame

EFFECTIVE DATE: Jun. 13, 1997

SUBJECT:

Popping, Oil Canning
or Metallic Noise From
Front of Vehicle

MODELS:

1996 - 1997 (LH) Concorde/Intrepid/Vision/LHS/New Yorker

SYMPTOM/CONDITION:

Popping, oil canning or metallic sounding noise from front area of vehicle when accelerating from a stop. Noise most noticeable in high ambient
temperatures (90° F. or higher).

DIAGNOSIS:

Moderately accelerate vehicle and listen for noise from passenger toe board area. If noise is present, perform the Repair Procedure.

PARTS REQUIRED:

AR (2)

04695176

Isolator, Cradle Mounting, SDC Suspension, Upper

AR (2)

04582973

Isolator, Cradle Mounting, SDC Suspension, Lower

AR (2)

04582972

Isolator, Cradle Mounting, SDE Suspension, Upper

AR (2)

04582974

Isolator, Cradle Mounting, SDE Suspension, Lower

REPAIR PROCEDURE:

This bulletin involves installing 2 new upper and 2 new lower cradle mounting isolators.

1.

Raise vehicle on a suitable hoist.

2.

Support engine/transaxle cradle with jack stands.

3.

Loosen cradle mounting bolts (4).

4.

Remove cradle mounting bolts one at a time and replace cradle mounting isolator.

5.

Tighten cradle mounting bolts to 155 Nm (115 ft.lbs.).

6.

Lower vehicle, verify condition is repaired.

POLICY: Reimbursable within the provisions of the warranty.

TIME ALLOWANCE:

Labor Operation No:

13-30-06-90

0.7 Hrs.

FAILURE CODE: P8 - New Part

Technical Service Bulletin # 13-01-97

Date: 970613

Suspension/Frame - Popping or Metallic Noises

NO: 13-01-97

Suspension/Frame - Popping or Metallic Noises|Page 6777 > < Suspension/Frame - Popping or Metallic Noises