Concorde V6-215 3.5L SOHC (1996)
5. The EGR valve attaches to the rear of the right cylinder head (Fig. 6).
6. Remove EGR tube lower screws at EGR valve.
7. Remove EGR valve mounting screws.
8. Remove EGR valve and transducer.
9. Clean gasket surfaces. Discard old gasket. If necessary, clean EGR passages.
INSTALLATION
1. Install EGR valve and new gasket on cylinder head. Tighten mounting screws to 22 Nm (200 in lb) torque.
2. Using a new gasket, attach EGR tube to EGR valve. Tighten mounting screws to 11 Nm (95 in lb) torque.
3. Tighten EGR tube to intake manifold plenum screws to 22 Nm (200 in lb) torque.
4. Connect transducer solenoid to vacuum fitting on manifold.
5. Slide transducer into bracket.
6. Attach electrical connector to solenoid.
