Concorde V6-215 3.5L SOHC (1996)
2.
Use the arrow keys and select # 2 -- MDS DIAGNOSTICS on the DRB III MAIN MENU Screen.
3.
Use the arrow keys and select DIAGNOSTICS MENU on the MDS, then press NEXT MENU.
4.
Use the arrow keys and select VEHICLE CONTROLLER PROGRAMMING on the MDS, then press NEXT MENU.
5.
Use the arrow keys and select PROGRAM VEHICLE CONTROLLER on the MDS, then press NEXT MENU.
6.
Follow the steps presented on the MDS and DRB Ill which will allow the DRB III to obtain the current part number of the PCM.
7.
The MDS will display the part number of the PCM on the vehicle and the appropriate replacement part number, then press NEXT MENU to begin
programming.
NOTE:
If the PCM on the vehicle has already been updated or reprogrammed, a NO UPDATES AVAILABLE message will be displayed. Verify that
the part number of the PCM (or previously installed authorized software update label) matches the part number displayed on the MDS and then
continue with Step C.
8.
The MDS and DRB III will prompt for any operator action needed during the remainder of the programming process.
B. Install Authorized Software Update Label
1.
Type the necessary information on the supplied "Authorized Software Update" label (Figure 1) and attach it to the PCM. Cover the label with the
clear plastic portion of the supplied label.
C. Install the Recall Completion Label
1.
With a ball point pen, print your dealer code (5 digits) on the supplied Rec Completion Label.
2.
Peel the label from its backing and apply it near the Vehicle Emission Con Information Label located in the engine compartment.
D. Complete Proof of Correction Form
1.
Complete a Vehicle Emission Recall Proof of Correction Form and supply it to the vehicle owner.
Owner Letter
EMISSIONS RECALL TO REPROGRAM YOUR VEHICLE'S
POWERTRAIN CONTROL MODULE
Dear Chrysler Passenger Car Owner:
It has been determined that some 1995 Chrysler Cirrus and Dodge Stratus; and 1996 Chrysler Cirrus, Concorde, LHS and Sebring Convertible; Dodge
Neon, Stratus and Intrepid; Plymouth Breeze and Neon; and Eagle Vision vehicles may be in violation of California Emissions Standards.
The problem is...
The on-board diagnostic system on your vehicle (identified by the Vehicle Identification Number on the enclosed form), may be missing certain
information required by California Air Resources Board (CARB) regulations. Absence of this information will cause your vehicle to fail the required
California SMOG Check inspection.
What Chrysler and your dealer will do...
Chrysler will repair your vehicle free of charge (parts and labor). To do this, your dealer will reprogram the powertrain control module. The service will
take about one half hour but additional time may be required depending on how service work is scheduled and processed.
What you must do...
^
Simply contact your dealer to schedule a service appointment. Ask the dealer to hold the parts for your vehicle or to order them before your
