Concorde V6-3.2L VIN J (2000)
Carpet: Service and Repair
Carpets
CARPETS
REMOVAL
1. Remove floor mats.
2. Remove door sill trim covers.
3. Remove cowl side trim covers.
4. Remove front seats.
5. Remove bolts attaching front seat belt lower anchors to floor below B-pillar trim panels.
6. Remove center console, if equipped.
7. Remove rear seat cushion.
8. Remove gas pedal bracket.
9. Remove carpet fasteners.
Fig. 6
10. Remove carpet from vehicle (Fig. 6).
INSTALLATION
1. Place carpet in proper position on floor of vehicle.
2. Install carpet fasteners.
3. Using double back tape or hook and loop, secure carpet strap behind the instrument panel center support bracket.
4. Install cowl side trim covers.
5. Install door sill trim covers.
6. Install rear seat cushion.
7. Install gas pedal bracket.
8. Install center console, if equipped.
9. Install bolts to attach seat belt lower anchors to floor below B-pillar trim panels.
10. Install front seats.
11. Install floor mats.
