Concorde V6-3.2L VIN J (2000)
3. Remove the OTIS from overhead console.
INSTALLATION
1. For installation, reverse the above procedures.
2. Align the OTIS guides on the housing with the grooves of the console. Make sure the LOOP of wire that was clipped into the OTIS module
housing is properly clipped into the new module before the console is placed back into the headliner.
Overhead Travel Information System (OTIS) Lamp Replacement
REMOVAL
1. Remove overhead console, refer to Console Removal and Installation procedures.
2. Using a flat blade screwdriver twist out socket/lamp.
3. Replace lamp(s) as necessary.
INSTALLATION
For installation, reverse the above procedures.
Overhead Console Base Plate Replacement
REMOVAL
1. Remove overhead console. Refer to Overhead Console Removal and Installation procedures.
2. Remove head liner.
Mini Console Base Removal
3. Using an trim stick, remove console base by disengaging the body clips.
4. Remove base from vehicle.
INSTALLATION
For installation, reverse the above procedures.
