Concorde V6-3.2L VIN J (2000)
2. Disengage clips attaching trim to A-pillar by pulling on trim (Fig. 1).
3. Slide A-pillar trim rearward, to disengaging from instrument panel top cover.
4. Remove A-pillar trim from vehicle.
INSTALLATION
1. Slide A-pillar trim forward ensuring that the trim engages with the instrument panel top cover.
2. Engage clips to attach trim to A-pillar.
3. Install instrument panel end cap.
B-Pillar Lower Trim
B-PILLAR LOWER TRIM
REMOVAL
1. Remove seat belt height adjuster knob.
2. Remove upper B-pillar trim.
Fig. 4
3. Remove bolt attaching seat belt to floor below B-pillar (Fig. 4).
4. Remove access door from above seat belt slot on B-pillar trim.
5. Disengage clips attaching lower trim to B-pillar.
6. Slide seat belt through the B-pillar trim.
7. Remove B-pillar trim from vehicle.
INSTALLATION
1. Slide seat belt through the B-pillar trim.
2. Place B-pillar trim in position on vehicle.
3. Engage clips attaching lower trim to B-pillar.
4. Install access door above seat belt slot on B-pillar trim.
5. Install bolt attaching seat belt to floor below B-pillar.
6. Install upper B-pillar trim.
7. Install seat belt height adjuster knob.
8. Refit weatherstrip.
B-Pillar Upper Trim
B-PILLAR UPPER TRIM
REMOVAL
1. Disengage shoulder belt turning loop cover.
2. Remove adjuster knob.
3. Remove bolt attaching turning loop to shoulder belt height adjuster.