Concorde V6-3.2L VIN J (2000)
Vacuum Brake Booster: Description and Operation
DESCRIPTION
The power brake booster assembly mounts on the engine side of the dash panel. It is externally connected to the brake pedal by an input push rod
extending out the rear of the booster. The master cylinder is bolted to the front of the power brake booster assembly.
A vacuum check valve is mounted on the power brake booster body. A vacuum line connects the booster (check valve) to the intake manifold.
Depending on the engine combination, different vacuum hose routings are required.
The power brake booster can be identified by the tag attached to the body of the booster assembly. This tag contains the following information: