Concorde V6-3.2L VIN J (2000)
Vacuum Brake Booster: Service and Repair
REMOVAL
1. Remove the battery ground cable from the ground stud on the right strut tower. Then, correctly isolate the ground cable by installing the cable
isolator on the ground stud.
2. Remove caps from both wiper arms at the attachment to the pivots to expose the wiper arm attaching nut. Remove the nut attaching each wiper arm
to its pivot.
3. Remove the wiper arms from the pivots. Wiper arms are removed from the pivots by rocking them back and force on the pivots until they can be
pulled off the pivots.
4. Remove the wiper module cover and cowl cover from the vehicle.
