Concorde V6-3.2L VIN J (2000)
Tires: Procedures
Cleaning
Remove the protective coating on the tires before delivery of a vehicle. This coating may cause deterioration of the tires.
To remove the protective coating, apply warm water and let it soak for a few minutes. Afterwards, scrub the coating away with a soft bristle brush. Steam
cleaning may also be used to remove the coating.
NOTE: DO NOT use gasoline, mineral oil, oil-based solvent or a wire brush for cleaning.
Pressure Gauges
A quality air pressure gauge is recommended to check tire pressure. After checking the air pressure, replace valve cap finger tight.
Tire Inflation Pressures
Fig. 4
Under inflation causes rapid shoulder wear, tire flexing, and can result in tire failure.
Fig. 5
Over inflation causes rapid center wear and loss of the tire's ability to cushion shocks.
Improper inflation can cause:
-
Uneven wear patterns
-
Reduced tread life
-
Reduced fuel economy
-
Unsatisfactory ride
-
The vehicle to drift.
