Concorde V6-3.2L VIN J (2000)
INSTALLATION
EGR Tube Seal
1. Install rubber silicone seals on intake manifold end of EGR tube, being careful to be sure silicone rubber seals is correctly installed and
undamaged.
2. Using a new gasket, loosely install the EGR tube into the intake manifold and loosely install EGR tube to EGR valve.
3. Tighten the EGR tube to EGR valve screws to 11 Nm (95 in. lbs.) torque.
EGR Tube And Clip
4. Install clips for the EGR tube to intake manifold plenum.
5. Install transmission to throttle body bracket.
6. Install air inlet tube and resonator.
7. Connect negative battery cable.
