Concorde V6-3.2L VIN J (2000)
Ignition Coil: Service and Repair
Ignition Coil Replacement
REMOVAL
1. Prior to removing the ignition coils, spray compressed air around the coil area and spark plug.
2. Remove electrical connector from ignition coil. On these engines, it is necessary to loosen the screws by alternating back and forth. Do not lose the
spacers under the coil when loosening the screws.
3. Remove 2 fasteners from ignition coil assembly.
4. Remove ignition coil assembly.
INSTALLATION
1. Install ignition coil assembly for spark plug.
2. Install coil screws and tighten: to 6.7 N.m (60 in. lbs.).
3. Connect the electrical connector.