Concorde V6-3.2L VIN J (2000)
Body Control Module: Description and Operation
Driver Airbag Module
The airbag protective trim cover is the most visible part of the driver side airbag system. The module is mounted directly to the steering wheel.
Located under the trim cover are the horn switch, the airbag cushion, and the airbag cushion supporting components. The airbag module includes a
housing to which the cushion and inflator are attached and sealed. The airbag module cannot be repaired, and must be replaced if deployed or in
any way damaged. The inflator assembly is mounted to the back of the airbag module. The inflator seals the hole in the airbag cushion so it can
discharge the gas it produces directly into the cushion when supplied with the proper electrical signal. The protective trim cover is fitted to the
front of the airbag module and forms a decorative cover in the center of the steering wheel. Upon airbag deployment, this cover will split at a
predetermined breakout line.
WARNING: THE AIRBAG MODULE INFLATOR ASSEMBLY CONTAINS SODIUM AZIDE AND POTASSIUM NITRATE. THESE
MATERIALS ARE POISONOUS AND EXTREMELY FLAMMABLE. CONTACT WITH ACID, WATER, OR HEAVY METALS
MAY PRODUCE HARMFUL AND IRRITATING GASES (SODIUM HYDROXIDE IS FORMED IN THE PRESENCE OF
MOISTURE) OR COMBUSTIBLE COMPOUNDS. DO NOT PUNCTURE, INCINERATE, OR BRING INTO CONTACT WITH
ELECTRICITY. DO NOT STORE AT TEMPERATURE EXCEEDING 93 °C (200 °F).
