Concorde V6-3.2L VIN J (2000)
Alignment: Specifications
Curb Height Adjustment
CONCORDE/LHS/300M
FRONT
29.09 +- 0.79 in
REAR
29.68 +- 0.79 in
INTREPID
FRONT
28.70 +- 0.79 in
REAR
28.93 +- 0.79 in
Front Wheel Alignment
Camber
Perferred Range
0.00 deg
All specifications are given in degrees. All wheel alignments are
to be set with the vehicle at curb height.
Acceptable Range -0.60 to +0.60 deg
Cross Camber (Maximum Side-To-Side Difference)
Perferred Range
0.00 deg
Acceptable Range 0.70 deg
Total Toe
Preferred Settings 0.00 deg
Acceptable Range 0.20 to +0.20 deg
Rear Wheel Alignment
Camber
Perferred Range
0.20 deg
All specifications are given in degrees. All wheel alignments are
to be set with the vehicle at curb height.
Acceptable Range -0.70 to +0.30 deg
Total Toe
Perferred Range
+0.10 deg
TOTAL TOE is the sum of both the left and right wheel toe
settings. TOTAL TOE must be equally split between each front
wheel to ensure the steering wheel is centered after setting toe.
Positive (+) is Toe-in, Negative (-) is Toe-out.
Acceptable Range -0.20 to +0.40 deg
Thrust angle
Perferred Range
+0.10 deg
Acceptable Range -0.15 to +0.15 deg
