Concorde V6-3.2L VIN J (2000)
Power Steering Fluid: Testing and Inspection
WARNING: FLUID LEVEL SHOULD BE CHECKED WITH ENGINE OFF TO PREVENT INJURY FROM MOVING PARTS. DO NOT
USE AUTOMATIC TRANSMISSION FLUID IN THE POWER STEERING SYSTEM. DO NOT OVERFILL THE POWER STEERING
SYSTEM.
Wipe off the power steering fluid reservoir so that it is free of dirt. Check the fill level of the power steering fluid in the reservoir according to the
markings on the side of the reservoir. The MAXIMUM COLD/MINIMUM COLD fluid levels are to be measured with the power steering fluid at a
normal ambient temperature of approximately 32°C to 43°C (90°F to 110°F). In all pumps add fluid as necessary, using only Mopar Power Steering
Fluid, or an equivalent. DO NOT USE ANY TYPE OF AUTOMATIC TRANSMISSION FLUID.
