Concorde V6-3.5L VIN G (2002)
Engine Mount: Description and Operation
DESCRIPTION
The engine mounting system consist of three mounts; two hydro-type mounts are attached to the right and left side of the engine block, and one
molded rubber type rear mount is attached to the transaxle (Fig. 80). All three mounts attach to the suspension crossmember/engine cradle.
The engine hydro-type mounts contain a liquid that is encased in a solid rubber housing.
INSPECTION
Engine hydro-mounts may show surface cracks. This will not effect performance and mount should not be replaced. Only replace the engine hydro
mounts when leaking fluid.
