chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

ABOUT US
Crankshaft Position Sensor <--> [Crankshaft Position Sensor] > < Component Locations|Page 3073

Concorde V6-3.5L VIN K (2003)

Page 1
background image

Engine Coolant Temperature (ECT) Sensor: Service and Repair

ENGINE COOLANT TEMPERATURE SENSOR 

REMOVAL 

1. Disconnect negative cable from remote jumper terminal.
2. With the engine cold, disconnect coolant sensor electrical connector or.
3. Remove sensor.

INSTALLATION 

1. Install engine coolant temperature sensor or. Tighten sensor to 28 Nm (20 ft. lbs.) torque.
2. Attach electrical connector to sensor.
3. Connect negative cable to remote jumper terminal.

Crankshaft Position Sensor <--> [Crankshaft Position Sensor] > < Component Locations|Page 3073