Cordoba V8-318 5.2L VIN P 2-bbl (1983)
Crankshaft Position Sensor: Service and Repair
W/ ESC
Distributor Assembly
1.
Lubricate and install upper thrust washer(s) on shaft and slide shaft into distributor body.
2.
Install distributor shaft retainer and pin.
3.
Install plate and pickup coil assembly and retaining screws.
4.
Position reluctor keeper pin into position on reluctor sleeve.
5.
Slide reluctor down reluctor sleeve and press firmly into place, then install keeper pin.
Distributor Disassembly
Fig. 4 Exploded view of Electronic Spark Control distributor w/dual pickup