Crossfire V6-3.2L VIN L (2004)
Body Control Module: Service and Repair
Removal-RHD
REMOVAL
1. Disconnect the negative battery cable.
2. Slide the clips forward to remove the plastic control module box cover (1).
3. Holding the metal body control module retaining clip back, pull the body control module (6) up and out of the control module box (5).
4. Disconnect the BCM harness connectors by first sliding the grey motor harness wiper connector lock to the right and disconnecting the windshield
wiper harness connector. Then, pull the metal body control module connector lock up to unlock and disconnect the rest of the body control module
harness connectors.
INSTALLATION